11
Installing on a Pocket PC
Reinstalling the Dashboard with a different IRQ
If the message, “Communication Failed!...” occurs when you start the
Dashboard, a possible reason is that you have assigned an interrupt
request, IRQ, to the im240 Wireless Modem that has been assigned to
another device.
To change the interrupt assigned to the im240 Wireless Modem:
1
Reinstall the im240 Wireless Modem Dashboard.
2
It is not necessary to uninstall the Dashboard.
3
When prompted, enter the COM port and assign a different IRQ to
the im240 Wireless Modem. To get the next available COM port, go
to Control Panel and open Ports. Select a COM port that is not
used. For example, if ports displays COM1, then select
COM2/COM3/COM4.
Note:
To find an available unused IRQ, go to:
•
Start > Programs > Administrative Tools > Windows NT
Diagnostics.
•
Click on the Resources Tab and click the IRQ button in that
property page.
•
This page lists all the IRQs that are currently in use.
•
Select an IRQ from this list 3-7, 9-12, and 15 that is not in use, for
example 10.
•
After entering the COM port and IRQ, the im240 Wireless Modem
is installed as a COM port
4
When prompted, shut down Windows.
5
Turn on your laptop and start Windows.
6
After restarting you will be prompted to install the wireless modem.
7
With the SIM card inserted into the im240 Wireless Modem, and the
label of the im240 Wireless Modem facing up, carefully insert the
im240 Wireless Modem into your laptop card slot.
8
On the next page, click Have Disk to browse to the location where
you installed the Dashboard and select the subfolder "Driver". Click
OK and Click Next.
Installing on a Pocket PC
1
Connect your Pocket PC to your laptop or desktop computer using
the cable or cradle provided with your Pocket PC.
Содержание im240 - Wireless PC Card Modem
Страница 2: ......
Страница 5: ...iii MOTOROLA LIMITED WARRANTY 30 Patent and Trademark Information 33 Index 34 ...
Страница 8: ...vi ...
