Motorola im240 - Wireless PC Card Modem, Руководство пользователя

Страница: 18 / 43

10
Modem Setup
Installing the modem driver
1 In the Control Panel, double click the Modems icon. If the Install
New Modem wizard opens, skip to step 3. Otherwise, proceed to
step 2.
2 Click the Add button to open the Install New Modem wizard.
3 Select Don’t detect my modem, I will select it from a list and click
Next .
4 Select the Have Disk button.
5 Enter d :\Drivers\WinNT\ where d is the drive letter for your
CD-ROM drive and click OK .
6 On completion of this step, the modem driver is installed and you
can proceed to configure the im240 Wireless Modem to use your
account (if it was not preactivated).
7 Verify that im240 Wireless Modem is displayed and click Next .
8 Select the port that you installed in the previous step. Click Next .
9 Click Finish .
Setting up Remote Access Service (RAS)
1 The Network control panel opens. In the Network window, select the
Services tab. Within the Services tab, select Remote Access
Service. Click Properties
2 The Remote Access Setup window opens. Click Add .
3 The Add RAS Device window opens. Ensure the COM port for your
im240 Wireless Modem is selected from the drop-down list. Then
click
OK .
4 The Remote Access Setup window now shows the added COM
port. Verify that the im240 Wireless Modem was added to the list of
RAS devices, verify that TCP/IP is the only dial out network protocol
by clicking Network and then Protocols. Then click
Continue .
5 In the Network Services Selection window, click Close .
6 The Network Settings Change window opens prompting you to
restart your laptop. Click
Yes to restart.
7 The im240 Wireless Modem is now installed.
Note: Dial up networking must be installed on the Computer for
Dashboard to install properly. Follow the steps for “Installing
the modem driver” before using the Dashboard.