9
Installing on Windows NT
2
Log on as Administrator.
3
Insert the im240 Wireless Modem Installation and Application
Software CD in your CD-ROM or DVD drive.
•
If the im240 Wireless Modem and Installation and Application
Software installation program does not start automatically, select
Start, Run, and then type
d:\setup.exe
, where
d
refers to the letter
of your CD-ROM or DVD drive.
4
Use the
Next
and
Back
buttons to navigate through the Wizard.
Using the default settings for the Destination Location and Program
Folder is recommended unless you have special requirements and
an advanced understanding of PC configuration.
5
When prompted, users will be required to enter the COM port and
the IRQ that will be assigned to the im240 Wireless Modem. To get
the next available COM port, go to Control Panel and open Ports.
Select a COM port that is not used. For example, if ports displays
COM1, then select COM2/COM3/COM4.
Note:
To find an available unused IRQ, go to:
•
Start > Programs > Administrative Tools > Windows NT
Diagnostics.
•
Click on the Resources Tab and click the IRQ button in that
property page.
•
This page lists all the IRQs that are currently in use.
•
Select an IRQ from this list 3-7, 9-12, and 15 that is not in use, for
example 10.
•
After entering the COM port and IRQ, the im240 Wireless Modem
is installed as a COM port
6
When prompted, shut down Windows.
7
Turn on your laptop and start Windows.
8
After restarting you will be prompted to install the wireless modem.
9
With the SIM card inserted into the im240 Wireless Modem, and the
label of the im240 Wireless Modem facing up, carefully insert the
im240 Wireless Modem into your laptop card slot.
10
On the next page, click Have Disk to browse to the location where
you installed the Dashboard and select the subfolder "Driver". Click
OK and Click Next.
Содержание im240 - Wireless PC Card Modem
Страница 2: ......
Страница 5: ...iii MOTOROLA LIMITED WARRANTY 30 Patent and Trademark Information 33 Index 34 ...
Страница 8: ...vi ...
