Motorola GTR 8000 Скачать руководство пользователя

Страница: 133 / 346

3.8.3.2 Transferring and Installing the OS Image

Double click

Motorola <device>

from the navigation pane.

Step result:

The view opens and all currently discovered devices appear.

Select

Tools → OS Inventory

from the menu.

You can also press

to select the OS Inventory.

Step result:

A list of the OS images appears.

Verify OS images loaded on the UNC server appear in the OS inventory.

These images were automatically created during the

3.8.2 Loading Device OS Images to the UNC, page

3-44

procedure.

Under

Networks

in the navigation pane, select one or more devices from the same device class, right click the

selections, then choose

Update OS Image

from the menu.

Step result:

The Select OS Image window appears.

Select

Software Image

. Click

Next

Step result:

The Update OS Image window appears.

Select each device that appears in the Selected Devices section.

Step result:

This associates a version to a device instance.

In most cases, the “summary of device partitions” are already set up and you just need to verify
the values in step 10 through step 13.

Select

nvm partition

from the Manage Partition for Device section.

Step result:

This defines where the OS image is transferred.

This is the only choice for the device.

6871022P86-A - November 2012

3-49

Содержание GTR 8000


























































































































































































































































































































































Результаты поиска

Содержание GTR 8000

Отзывы:

Похожие инструкции для GTR 8000

Бренды по названию

Популярные бренды

Motorola GTR 8000, Руководство пользователя

Результаты поиска

Содержание GTR 8000

Отзывы:

Похожие инструкции для GTR 8000

Бренды по названию

Популярные бренды