Motorola GTR 8000 Скачать руководство пользователя

Страница: 127 / 346

3.8.1 Discovering a Device with the UNC

Enter:

http://ucs-unc0<Y>.ucs:9443/UNCW

in the Address field.

Where <Y> is the number of the UNC server (01 for primary core UNC server, and 02 for backup core UNC
server).

Step result:

The UNC Wizard launches and a login dialog box appears.

Type the administrative username and password. Click

Step result:

The UNC Wizard appears.

From the list of available wizards on the left side, select

Subnet Discovery

Step result:

The right side of the window is updated with the Subnet Discovery form.

Select

RF Site

by clicking on the Discovery Type drop-down list.

Enter the

Zone ID

Site ID

, and then click

Submit

Step result:

An auto-discovery job is created in the UNC Schedule Manager.

Log on to the UNC from the NM client by entering:

http://ucs-unc0<Y>.ucs

where <Y>is the number of the UNC server (01 for primary core UNC server, and 02 for backup core UNC
server).

Step result:

The UNC client launches and a login dialog box appears.

Type the administrative username and password. Click

Step result:

VoyenceControl launches.

The names EMC Ionix Network Configuration Manager and VoyenceControl are used
interchangeably for this product.

Press

(Schedule Manager).

Step result:

The Schedule Manager window appears in the UNC with the discovery jobs.

Verify that the

Zone

and

Site

containers include device(s) just discovered.

No site devices should be in the Lost and Found folder. If there are, see the

Unified Network Configurator

manual for troubleshooting guidance.

In the UNC Wizard, select

RF Site Level Configuration

Channel

to verify the device(s). Choose

Zone

if multiple zones exist.

6871022P86-A - November 2012

3-43

Содержание GTR 8000


























































































































































































































































































































































Результаты поиска

Содержание GTR 8000

Отзывы:

Похожие инструкции для GTR 8000

Бренды по названию

Популярные бренды

Motorola GTR 8000, Руководство пользователя

Результаты поиска

Содержание GTR 8000

Отзывы:

Похожие инструкции для GTR 8000

Бренды по названию

Популярные бренды