background image

 

 

FlexPass OFR100                                                             

 

K02000-000                               - 8 -                               06/29/01 

 

11. FCC REGISTRATION INFORMATION

 

 

FCC REQUIREMENTS PART 15 

Caution:

 Any changes or modifications in construction of this device which are not expressly approved by the 

manufacturer for compliance could void the user's authority to operate the equipment. 

 
NOTE: This device complies with 

Part 15 of the FCC Rules

 

Operation is subject to the following two conditions: 

1. This device may not cause harmful interface, and 
2. This device must accept any interference received, including interference that may cause undesired operation. 
 
This equipment has been tested and found to comply with the limits for a 

Class B Digital Device

, pursuant to 

Part 15 of 

the FCC Rules

. These limits are designed to this equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, 
the user is encouraged to try to correct interference by one or more of the following measures. 
 
1. Reorient or relocate the receiving antenna. 
2. Increase the separation between the equipment and receiver. 
3. Connect the equipment into an outlet on another circuit. 
4. Consult the dealer or an experienced radio/TV technician for help. 

 

12. Warranty and Service

 

FlexPass OFR100 warranty is 3 years from the shipped date; returns must have an RMA (Return 
Material Authorization) number. The customer is to provide a description of the specific problem. The 
customer is to include serial numbers, formats, and model numbers with the items to be returned. If the 
exact duplicated of returned cards or tags are requested, the customer must provide Motorola with exact 
format and ID numbers needed. 
 

Contact Technical Support 
Motorola 
3041 Orchard Parkway 
San Jose, CA 95134-2017 
Tel (408) 383-4000, Main 
Tel (800) 646-3252, Technical Support 
Fax (408) 434-7057 

 

NOTE

:  Damage occurring during shipment is deemed the responsibility of the carrier, and claims should be made directly 

  

to the carrier. 

Содержание FlexPass OFR100









Отзывы: