manualshive.com logo in svg

Motorola ET1, Руководство интегратора

Поделиться
Скачать
Motorola ET1 Скачать руководство пользователя страница 63

DataWedge Configuration

4 - 7

Configuring a Profile

To configure the Profile0 or a user-created profile, touch the profile name. The 

Profile 

configuration screen 

appears.

Figure 4-7

Profile Configuration Screen

•

Profile enabled

 - Enables or disables this profile. A check in the checkbox indicates that the profile is 

enabled.

Applications

Use 

Applications

 option to associate applications with this profile.

Associated Apps

User created profiles should be associated with one or more applications and its activities.

1.

Touch 

Associated apps

. A list of applications/activities associated with the profile displays. Initially the list 

does not contain any applications/activities.

Figure 4-8

Associated Apps Screen

2.

Touch  

> 

New app/activity

. The 

Select application

 menu appears.

Содержание ET1

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды