manualshive.com logo in svg

Motorola ET1, Руководство интегратора

Поделиться
Скачать
Motorola ET1 Скачать руководство пользователя страница 59

DataWedge Configuration

4 - 3

Profiles

DataWedge is based on profiles and plug-ins. A profile contains information on how 

DataWedge

 should 

behave with different applications.

Profile information consists of:

•

Associated application

•

Input plug-in configurations

•

Output plug-in configurations

•

Process plug-in configurations.

Using profiles, each application can have a specific 

DataWedge

 configuration. For example, each user 

application can have a profile which outputs scanned data in the required format when that application comes 
to the foreground. DataWedge can be configured to process the same set of captured data differently based on 
the requirements of each application.

DataWedge

 includes the following visible and hidden pre-configured profiles which support specific built-in 

applications:

•

Visible profiles:

•

Profile0

 - created automatically the first time 

DataWedge

 runs. Generic profile used when there are 

no user created profiles associated with an application.

•

Launcher

 - disables scanning when the Launcher is in foreground.

•

DWDemo

 - provides support for the DWDemo application.

•

Hidden profiles (not shown to the ET1):

•

RD Client - provides support for MSP.

•

MSP Agent - provides support for MSP.

•

MspUserAttribute - provides support for MSP.

•

Camera - disables scanning when the default camera application is in foreground.

•

RhoElements - disables scanning when RhoElements is in foreground.

Profile0

Profile0

 can be edited but cannot be associated with an application. That is, 

DataWedge

 allows manipulation 

of plug-in settings for 

Profile0

 but it does not allow assignment of a foreground application. This configuration 

allows 

DataWedge

 to send output data to any foreground application other than applications associated with 

user-defined profiles when 

Profile0

 is enabled.

Profile0

 can be disabled to allow 

DataWedge

 to only send output data to those applications which are 

associated in user-defined profiles. For example, create a profile associating a specific application, disable 

Profile0

 and then scan. 

DataWedge

 only sends data to the application specified in the user-created profile. 

This adds additional security to 

DataWedge

 enabling the sending of data only to specified applications.

Plug-ins

A plug-in is a software module utilized in 

DataWedge

 to extend its functionality to encompass technologies 

such as bar code scanning. The plug-ins can be categorized into three types based on their operations:

Содержание ET1

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды