Motorola ET1 Скачать руководство пользователя страница 134

Страница: 134 / 184

9 - 4

ET1 Enterprise Tablet Integrator Guide

Save and close the file.

To install ADB USB driver for the first time:

Connect the ET1 to the host computer using the Single-slot USB Docking cradle or the USB/Charge
cable. See

Chapter 2, Accessories

Windows detects a new USB hardware device and launches

Hardware Update Wizard

Select

install from the a list or specific location

and click

Next

Click

Browse

and locate the USB driver folder: <sdk dir>\extras\google\usb_driver.

Click

Next

to install the driver.

Reboot the host computer.

Verify the device is connected.

In the Windows Command prompt, execute command:

adb devices

from <sdk>/platform-tools.

If connected, the ET1 displays in the device list.

Linux Installation

To install the USB driver on a Linux operating system:

Locate the

adb_usb.ini

file in

.android

directory: ~/.android/

Edit the

adb_usb.ini

file. If the file is not available then created this file in the directory.

Add 0x05E0 to the adb_usb.ini file.

Save and close the file.

Setup udev rules to include ADB USB configuration with ET USB vendor ID for ET1.

Add the following USB vendor ID in 51-android.rules file

SUBSYSTEM==“usb”, ATTR{idVendor}==“05e0”, MODE=“0666”, OWNER=“<user_name>”

Save and close the file.

Change the file permissions on 51-android.rules file.

Execute command: chmod a+r /etc/udev/rules.d/51-android.rules

Note: For details on configuring the ADB USB vendor ID, go to
http://developer.android.com/guide/developing/device.html.

Reboot the host computer.

Verify the ET1 USB connection.

On the Linux terminal, execute command: adb devices from <sdk>/platform-tools/ directory.

If connected, the ET1 displays in the device list.

Application Installation

After an application is developed, install the application onto the ET1 using one of the following methods:

•

USB connection, see

Chapter 3, USB Communication

Содержание ET1

























































































































































































Результаты поиска

Содержание ET1

Отзывы:

Бренды по названию

Популярные бренды

Motorola ET1, Руководство интегратора

Результаты поиска

Содержание ET1

Отзывы:

Бренды по названию

Популярные бренды