Motorola DH6200, Руководство по установке

Страница: 58 / 72

4 DIAGNOSTICS
48
The Interface Status fields are:
Field Description
DOCSIS Tuner & Xmitter Indicates if enabled; indicates if active
1394 I/O Device Indicates if enabled; indicates if active
USB I/O Device
Indicates if enabled; indicates if active
Ethernet Device Indicates if enabled; indicates if active
IR Xmit
Indicates if enabled; indicates if active
Smart Card Indicates if enabled; indicates if active
SPDIF Indicates if enabled; indicates if active
DVI/HDMI Port If a device is connected to the HDMI port only, the following diagnostics
display to help troubleshoot the HDMI interface. They all display “N/A” if
no device is connected to the HDMI port or the value is invalid or cannot
be retrieved.
Device Connected
Indicates whether a device is connected to the HDMI port — Yes or No.
Repeater Indicates whether the connected device is a repeater — Yes or No.
Video Xmission
(transmission) Indicates whether the DCH6200 is transmitting video over the HDMI port
— Not Active or Active.
HDCP Enabled
Indicates whether the DCH6200 is using HDCP to encrypt video
transmitted over the HDMI link — Yes or No. If the Video Xmission
status is Not Active, the HDCP Enabled status is No.
Output Format Indicates the timing format of the video sent through HDMI:
1920 x 1080I — 1920 pixels wide by 1080 pixels high, interlaced
1280 x 720P — 1280 pixels wide by 720 pixels high, progressive
720 x 480P — 720 pixels wide by 480 pixels high, progressive
720 x 480I — 720 pixels wide by 480 pixels high, interlaced
640 x 480P — 640 pixels wide by 480 pixels high, progressive
Aspect Ratio Indicates the aspect ratio of the video sent through HDMI — 4:3 or 16:9.
EDID Data Indicates the video timing formats that were read from the Extended
Display Identification Data (EDID) registers for the connected device, in
particular the detailed timing description blocks. The list displays all of
the formats that the DCH6200 could read up to a maximum of 12
formats. If the DCH6200 cannot read any formats, EDID Data is blank.
An asterisk (*) after the aspect ratio means the DCH6200 supports the
format. If more than twelve video timing formats are discovered, the
supported formats only are listed first followed by any remaining
formats, up to twelve.