Motorola DCX3520e-M, Руководство по установке

Страница: 87 / 103

Diagnostics
High-Definition DVR DCX3510-M t Installation Manual 79
365-095-17066-x.1
Table 21: Interface Status Diagnostic Field Descriptions
Field Description
DOCSIS Tuner &
Xmitter
Indicates if enabled; indicates if active.
1394 I/O Device Indicates if enabled; indicates if active.
USB I/O Device Indicates if enabled; indicates if active.
Ethernet Device Indicates if enabled; indicates if active.
Parallel Port
Indicates if enabled; indicates if active.
IR Xmit Indicates if enabled; indicates if active.
Hard Drive
Status
Indicates if enabled; indicates if active.
Smart Card
Indicates if enabled; indicates if active.
HDMI Port If a device is connected to the HDMI port only, the following diagnostics display to
help troubleshoot the HDMI interface. They all display “N/A” if no device is connected
to the HDMI port, or if the value is invalid or cannot be retrieved.
x
Device Connected — Indicates whether a device is connected to the HDMI port—
Yes or No.
x
Repeater — Indicates whether the connected device is a repeater — Yes or No.
x
Video Xmission (transmission) — Indicates whether the DCX3510-M is transmitting
video over the HDMI port — Not Active or Active.
x
HDCP Enabled — Indicates whether the DCX3510-M is using HDCP to encrypt
video transmitted over the HDMI link — Yes or No. If the Video Xmission status is
Not Active, the HDCP Enabled status is No.
x
Output Format — Indicates the timing format of the video sent through HDMI:
x 1920 x 1080i — 1920 pixels wide by 1080 pixels high, interlaced
x
1280 x 720p — 1280 pixels wide by 720 pixels high, progressive
x
720 x 480p — 720 pixels wide by 480 pixels high, progressive
x 720 x 480i — 720 pixels wide by 480 pixels high, interlaced
x
640 x 480p — 640 pixels wide by 480 pixels high, progressive
Aspect Ratio — Indicates the aspect ratio of the video sent through HDMI —
4:3 or 16:9.
EDID Data Indicates the video timing formats that were read from the Extended Display
Identification Data (EDID) register for the connected device, in particular the detailed
timing description blocks. The list displays all of the formats that the DCX3510-M could
read, up to a maximum of 12 formats. If the DCX3510-M cannot read any formats,
EDID Data is blank. An asterisk (*) after the aspect ratio means the DCX3510-M
supports the format. If more than twelve video timing formats are discovered, the
supported formats only are listed first, followed by up to twelve remaining formats.
1394 Information If a connection is made to a 1394 device, the screen indicates:
x Active Ports – number of active ports detected
x Data XMission – if data flow is detected through the port
x 5C implementation – indicates the level 5C DTCP authentication currently