background image

General information

25

EN

6.

Adjust only those controls that are covered by the operating instructions. Improper adjustment 
of other controls may result in damage and will often require extensive work to restore the 
product to normal operation.

7.

Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to clean 
this phone.

8.

Use only the power supply that came with this unit. Using other power supplies may damage 
the unit.

9.

Because this phone operates on electricity, you should have at least one phone in your home 
that could operate without electricity in the case the power in your home goes out.

10.

To avoid interference to nearby appliances, do not place the base of the phone on or near a 
TV, microwave oven, or VCR.

Battery Safety Instructions

•  Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic 

materials that could be released, resulting in injury.

CAUTION

•  There is a risk of explosion if you replace the battery with an incorrect battery type. Use only 

the battery pack that came with your phone or an authorized replacement recommended by 
the manufacturer.

•  Keep battery packs out of the reach of children.
•  Remove battery packs if storing over 30 days.
•  Do not dispose of battery packs in fire, which could result in explosion.
•  The rechargeable battery packs that power this product must be disposed of properly and may 

need to be recycled. Refer to your battery’s label for battery type. Contact your local recycling 
center for proper disposal methods.

SAVE THESE INSTRUCTIONS

Cleaning

•  Clean the handset and base (or charger) with a damp (not wet) cloth, or an anti-static wipe.
•  Never use household polish as this will damage the product. Never use a dry cloth as this may 

cause a static shock.

Environmental

•  Do not expose to direct sunlight.
•  The handset may become warm when the batteries are being charged or during prolonged 

periods of use. This is normal. However, we recommend that to avoid damage you do not 
place the product on antique/veneered wood.

•  Do not stand your product on carpets or other surfaces which generate fibres, or place it in 

locations preventing the free flow of air over its surfaces.

•  Do not submerge any part of your product in water and do not use it in damp or humid 

conditions, such as bathrooms.

•  Do not expose your product to fire, explosive or other hazardous conditions.
•  There is a slight chance your phone could be damaged by an electrical storm. We recommend 

that you unplug the power and telephone line cord during an electrical storm.

Product disposal instructions

• 

European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive

The European Union's WEEE directive requires that products sold into EU countries must 
have the crossed out trashbin label on the product (or the package in some cases). As defined 
by the WEEE directive, this crossed-out trashbin label means that customers and end-users in 
EU countries should not dispose of electronic and electrical equipment or accessories in 
household waste. Customers or end-users in EU countries should contact their local 
equipment supplier representative or service centre for information about the waste collection 
system in their country.

•  The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been 

put in place to recycle products using best available recovery and recycling techniques to 
minimize the impact on the environment, treat any hazardous substances and avoid the 
increasing landfill.

Product disposal instructions for residential users

When you have no further use for it, please remove any batteries and dispose of them and the 
product per your local authority’s recycling processes. For more information please contact your 
local authority or the retailer where the product was purchased.

Product disposal instructions for business users

Business users should contact their suppliers and check the terms and conditions of the purchase 
contract and ensure that this product is not mixed with other commercial waste for disposal.

Consumer Products and Accessories Warranty

Thank you for purchasing this Motorola branded product manufactured under license by Suncorp 
Technologies Limited, 3001-3005 China Resources Building, 26 Harbour Road, Wan Chai, Hong 
Kong. ("Suncorp")

What Does this Warranty Cover?

Subject to the exclusions contained below, SUNCORP TECHNOLOGIES LTD. warrants that this 
Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this 
product that it manufactured  to be free from defects in materials and workmanship under normal 
consumer usage for the period outlined below. This Limited Warranty is your exclusive warranty 
and is not transferable.

Who is covered?

This warranty extends only to the first consumer purchaser, and is not transferable.

What will SUNCORP TECHNOLOGIES LTD do?

SUNCORP TECHNOLOGIES LTD or its authorized distributor at its option and within a 
commercially reasonable time, will at no charge repair or replace any Products or Accessories that 
does not conform to this limited warranty. We may use functionally equivalent reconditioned/ 
refurbished/ pre-owned or new Products, Accessories or parts.

What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, 
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE 
REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS 
THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER 

Содержание D1011































Отзывы: