Motorola CPEI 885 Series Скачать руководство пользователя | Manualshive

Страница: 29 / 55

background image

3-16

DEC 2010

3

Basic Configuration

Figure 3-5:

Wi-Fi Security

Wi-Fi Protected Setup (WPS)

Your CPE

i

885 supports Wi-Fi Protected Setup (WPS) to simplify the setup of your

wireless security. WPS can be used to configure client devices such as wireless
adapters in laptop computers that support WPS. If your client devices do not support
WPS, you will have to manually configure those devices. In order to use WPS to set
up your client devices, access the security section of the Wi-Fi configuration by
clicking on the Wi-Fi icon, then clicking on Security. Before you begin, you should
configure the security settings in the CPEi 885 as described in the section above
before continuing.

If you have client devices that do not support Wi-Fi Protected Setup, note the wireless
settings, and then manually configure those client devices.

There are two primary options available when utilizing WPS. Use the option below that
applies to the client device you are configuring. NOTE: WPS configures one client
device at a time. Repeat the procedure for each client device that supports WPS.

Use this method if your client device has a WPS button. Note that the button may be a
physical button located on the client device or a software button located on the client
device setup screen.

• There are two options available with the PBC method on the CPEi885, hard
ware button and software button.
• Hardware button PBC on the CPE

i

885

- Locate the WPS button on the back of the CPEi885 and client device.

Note that the button may be a physical button located on the client

device or a software button located on the device setup screen.

Option #1, Push Button Control (PBC)

NOTE

NOTE

«
...
27
28
29
30
31
...
»

Содержание CPEI 885 Series
























































Отзывы:

Нет отзывов

Похожие инструкции для CPEI 885 Series

Бренд: X-Micro Страницы: 74

Anybus Communicator ABC4021

Бренд: HMS Networks Страницы: 60

Бренд: Baicells Страницы: 10

Бренд: axing Страницы: 52

Media Board D/120JCT-LS-EW

Бренд: Dialogic Страницы: 2

Бренд: Moxa Technologies Страницы: 36

NetCon FBR-1409TX

Бренд: LevelOne Страницы: 88

Бренд: Tenda Страницы: 120

Бренд: H3C Страницы: 68

Бренд: netsys Страницы: 164

Бренд: Spirent Страницы: 22

Бренд: MCT Страницы: 12

Бренд: Cleerline Страницы: 2

VAR-SOM-MX6 HEAT PLATE KIT

Бренд: Variscite Страницы: 3

Бренд: Proxim Страницы: 45

Бренд: EtherWAN Страницы: 2

Бренд: Cambium Networks Страницы: 99

Бренд: MTI Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды