Motorola CPEi 23800 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 50

background image

7-2

OCT 2010

7

Important Safety and Legal Information

Industry Canada Statement

This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator & your body.

NOTE

This device complies with RSS-193, and RSS-Gen of the Industry Canada Rules.
Operation is subject to the following two conditions:
This device must accept any interference, including interference that may cause

undesired operation of the device.
This device has been designed to operate with an antenna having a maximum gain of 5
dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p) is not more than that permitted for
successful communications.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
IC Radiation Exposure Statement:

In non-EU countries, dispose of Motorola Networks equipment in accordance with
national and regional regulations.

Disposal of Motorola Equipment in Non-EU Countries

This product is compliant with the requirements of the European Union Restriction of
Hazardous Substances (EU RoHS) directive.

Please do not dispose of Motorola Networks equipment in land

fi

ll sites.

In the EU, Motorola Networks in conjunction with a recycling partner will ensure that
equipment is collected and recycled according to the requirements of EU
environmental law.

Disposal of Motorola Equipment in EU Countries

The following information is provided to enable regulatory compliance with the
European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic
Equipment (WEEE) when using Motorola Networks equipment in EU countries.

Caring for the Environment

«
...
45
46
47
48
49
...
»

Содержание CPEi 23800



















































Отзывы:

Нет отзывов

Похожие инструкции для CPEi 23800

USB ADSL Modem ADU-2000

Бренд: Planet Страницы: 24

Бренд: XtendLan Страницы: 73

Бренд: Edimax Страницы: 44

Бренд: ATO Страницы: 18

Бренд: Xoro Страницы: 6

Бренд: Billion Страницы: 1

Бренд: LG Innotek Страницы: 27

Бренд: Zte Страницы: 25

Бренд: Lantronix Страницы: 56

Бренд: Protectli Страницы: 33

Бренд: Eurotech Страницы: 120

Бренд: Technicolor Страницы: 29

Бренд: PROLiNK Страницы: 16

Бренд: PROLiNK Страницы: 16

Бренд: Guilin Feiyu Technology Страницы: 9

Бренд: IBM Страницы: 35

Бренд: Tecnet Страницы: 2

Бренд: PowerTraveller Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды