Motorola CP110 UHF, Руководство пользователя

Страница: 44 / 138

PROGRAM
MI
NG
FEATURES
English
42
• By pressing the PTT button while the radio is
scanning, the radio will transmit on the channel
which was selected before Scan was activated.
If no transmission occurs within five seconds,
scanning will resume.
• If you want to scan a channel without Interference
Eliminator Codes (CTCSS/DPL), set the code
settings for the channels to ‘0’ in the CTCSS/DPL
Programming Selection Mode.
Whenever the radio is set up in Scan, the LED
Indicator will signal a red blink.
Note: (*) Assumes the SB2 button is not
programmed to other function different from
the default. If Auto-Scan has been enabled
for a particular channel, do not press SB2 to
scan the channel, as the radio will do it
automatically.
Editing Scan List
Scan Lists can be edited by using the CPS
(refer to CPS section on page 43)
Nuisance Channel Delete
Nuisance Channel Delete allows you to
temporarily remove channels from the Scan
List. This feature is useful when irrelevant
conversations on a ‘nuisance’ channel tie up
the radio’s scanning feature.