5.4
Configuring Radios using the Multi-Unit Charger (Optional
Accessory)
Prerequisites:
When in Cloning Mode, you must have at least two radios. Identify the radios as follow:
• A fully charged battery on each radio.
• CLR Series Multi-Unit Charger (MUC).
• Both radios are turned off.
• A source radio which consists of the cloned or copied radio profile.
• A target radio.
Figure 9: Cloning Mode in Multi-Unit Charger
1
6
7
8
9
3
2
4
5
Table 16: Cloning Mode in Multi-Unit Charger
Number
Item
1
Pocket 1
2
"CLONE" symbol
3
Pocket 2
4
Pocket 4
5
Pocket 5
6
Pocket 7
7
Pocket 8
8
Pocket 10
9
Pocket 11
Procedure:
1
To put the source radio into clone mode, press and hold the source radio
PTT
button and the
-
button simultaneously while turning on the radio until you hear the cloning tone.
2
Place the source radio into one of the charging pockets that has the CLONE label(1, 4, 7, or 10).
3
Turn on the target radio and place it in the pairing charging pocket that has the CLONE label (2,
5, 8, 11).
MN007428A01-AB
Chapter 5: Radio Cloning
33
Содержание CLR PLUS
Страница 137: ...MN007428A01 AB Kapitel 10 Beschränkte Garantie von Motorola Solutions 11 Normaler und üblicher Verschleiß 48 ...
Страница 325: ...11 Elfogadott és szokásos kopás és elhasználódás MN007428A01 AB Fejezet 10 Motorola Solutions korlátozott garancia 47 ...
Страница 464: ...11 Zwykłe zużycie eksploatacyjne MN007428A01 AB Rozdział 10 Ograniczona gwarancja firmy Motorola Solutions 49 ...
Страница 562: ...Номер по каталогу Описание HKKN4028_ Кабель для клонирования MN007428A01 AB Глава 11 Аксессуары 51 ...