3.5
Stand-Alone Battery
The battery can be charged as a stand-alone battery.
The battery is charged by using either a Single Unit Charger (SUC) or a Multi-Unit Charger (MUC).
NOTICE:
When acquiring additional chargers or power supplies, ensure that you have a similar
drop-in tray chargers and power supplies sets. For more information on accessories, see
.
Figure 7: Stand-Alone Battery
1
Item Number
Description
1
Micro-USB port
3.5.1
Charging a Stand-Alone Battery with the Drop-in Tray SUC
Procedure:
1
To charge the battery, insert the connector of the power supply into the micro Universal Serial
Bus (USB) port on the front of the drop-in tray charger.
2
Connect the power supply to a proper AC outlet.
3
Insert the battery into the tray, with the inside surface of the battery facing the front of the
charger. See
Stand-Alone Battery on page 24
4
Ensure that the slots in the battery are correctly engaged in the charger.
3.5.2
Charging a Stand-Alone Battery with the Drop-in Tray MUC-
Optional Accessory
Procedure:
1
Place the charger on a flat surface or mount it on the wall.
2
Insert the power cord plug into the jack on the MUC.
3
Plug the cord into an AC outlet and then into the charger.
MN007419A01-AA
Chapter 3: Battery and Charger
24