53
Using the answer machine
When the memory is full, the outgoing message will automatically be set to
Answer Only. You must delete old messages before the C5010A can record
new messages.
12.14 Remote access
Remote access allows you to operate your answering machine and listen to
your messages by calling the C5010A from another phone.
The default setting is On.
1. Call your C5010A. When you hear the announcement, press *.
2. Enter your 4 digit remote access PIN (default setting = 0000). You will
hear a confirmation beep.
NOTE
You should change this code for additional security, see page 54.
3. Use the following keys to operate your answering machine:
DTMF code
Operations
*
To enter remote access mode
1
To hear main menu
2
To play all messages
3
To play new messages
4
To skip back during messages
5
To delete during messages
6
To skip forward during messages
7
To set Answer & Record OGM
8
To record a new OGM
9
To switch answer machine off
10
To switch answer machine on
NOTES
If you have any new messages they will be played after you have entered
your remote access PIN code.
If you enter an incorrect PIN code you will hear “Incorrect security code
or two beeps (error beeps). You can try entering the code again. If it is still
incorrect you will hear the voice prompt or two beeps (error beeps) and the
C5010A will hang up.
Operations
