manualshive.com logo in svg

Motorola APX NEXT, Руководство пользователя

Поделиться
Скачать
Motorola APX NEXT Скачать руководство пользователя страница 12

1.3

What Your Dealer/System Administrator Can Tell You

If the radio is to be operated in extreme temperatures (less than -30 °C or more than +60 °C), check
with your system administrator for the correct radio settings.

NOTE:

To ensure radio longevity, front display, LTE, Wi-Fi, Bluetooth, and GPS are not available when
radio internal temperature is below -20 ºC. The top display indicates 

Cold Temp Mode

 in this

temperature.

On the other hand, LMR radio communication is not available when the temperature reaches
-30 ºC.

You can consult your dealer or system administrator about the following:

• Is your radio programmed with any preset conventional channels?

• Which buttons have been programmed to access other features?

• What optional accessories may suit your needs?

NOTE: 

Specifications may vary for different radio models. Contact your system administrator for

more information.

MN005642A01-AN
Chapter 1 :  Read Me First

12  

Содержание APX NEXT
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды