manualshive.com logo in svg

Motorola APX 3000, Руководство пользователя

Поделиться
Скачать
Motorola APX 3000 Скачать руководство пользователя страница 60

The radio tries to establish connection with the device once paired.

NOTE: 

If the connection fails within 6 seconds, you hear a decremental-pitched tone to indicate

that the device is unpaired. The display shows 

<Device Type> UNPAIRED

. Repeat this step

to re-initiate the pairing process.

If the connection is successful, you hear an incremental-pitched tone. The display shows 

<Device

Type> CONNCTED

 and the Bluetooth icon turns from   to 

 .

If the radio has the pairing record of the device and the connection fails, you hear a short, low-pitched
tone. The display shows 

<Device Type> CON FAIL

.

7.15.2

Responder Alert Sensors

Responder alert sensors allow the radio to send an over-the-air (OTA) notification when the radio
receives the holster sensor event.

To enable the feature, ensure that the GPS, Enhanced Data, and Bluetooth feature of your radio is on
and the radio supports Bluetooth Low Energy (BTLE).

You can disable the feature temporarily or permanently. This feature allows you to prevent one or all
events from being reported OTA.

This feature is enabled through Customer Programming Software (CPS) configuration. Contact your
system administrator for more information.

7.15.2.1

Holster Sensor

Holster sensor monitors the state of the holster and allows the radio to send an over-the-air (OTA)
notification whenever a gun or a taser is pulled out of the holster or put in the holster.

7.15.2.2

Disabling the Sensor

This feature disables the sensors temporarily or permanently from sending the sensor events to the
system.

NOTE: 

The feature is only applicable to holster sensor and weapon fired sensor. Vest pierced

sensor cannot be disabled.

7.15.2.2.1

Disabling the Sensor Temporarily

Procedure:

1

Short-press the preprogrammed 

Sensor

 button to activate the sensor timer.

The following scenarios affect the sensor state:

• If a gun or taser is removed from the holster within the timer duration, the timer stops

and switches the sensor to disabled state. A tone sounds and the radio displays 

Sensor

Disable

.

NOTE: 

The radio enables the sensor only when all the guns or tasers are placed into

the holster. A tone sounds and the radio displays 

Sensor On

 temporarily.

68012007043-EM
Chapter 7 :  Advanced Features

60  

Содержание APX 3000



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды