Procedure:
Press the preprogrammed
Reprogram Request
button to send reprogram request to the
dispatcher.
The display shows
RPGM
and
PLS WAIT
.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
ACK RCVD
and the radio returns to the
Home
screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows
NO ACK
.
7.2
Remote Monitor
This feature allows the system administrator to turn on the microphone of a targeted radio with a
subscriber alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in CPS to route
the audio to the radio internal microphone, wired RSM microphone, or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible
activity surrounding the targeted radio.
7.3
Scan Lists
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity
by cycling through the channel/group. The sequence of scan is as specified in the scan list for the
current channel/group.
Your radio supports different types of Scan Lists:
• Conventional Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be programmed in your
radio.
7.3.1
Intelligent Priority Scan
Intelligent Priority Scan feature allows you to add or delete conventional channels and trunking
talkgroups from multiple systems into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, the radio scans for higher
priority member within the same Trunking or Conventional system.
7.3.2
Viewing a Scan List
Procedure:
68012007043-EM
Chapter 7 : Advanced Features
43
