Motorola APX 3000 Скачать руководство пользователя страница 45

Страница: 45 / 82

7.4.3

Restoring a Nuisance Channel

Procedure:

To restore the deleted nuisance channel, perform one of the following actions:

• Stop and restart a scan using the preprogrammed

Scan

button.

• Mode change to another channel and back to the original channel.

• Turn off the radio and then turn it on again.

7.5

Call Alert Paging†‡

This feature allows your radio to work like a pager.

If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.

NOTE:

This feature must be preprogrammed by a qualified radio technician.

7.5.1

Receiving a Call Alert Page

When and where to use:

When you receive a Call Alert page, you hear four repeating alert tones

and the LED blinks green. The backlight of the screen turns green, and the display briefly shows

PAGE

RCV

Procedure:

Press any button to clear the Call Alert page.

7.5.2

Sending a Call Alert Page

When and where to use:

Your radio must be preprogrammed for you to use this feature.

Procedure:

• Press the preprogrammed

Call Alert Paging

button to send a page to the preprogrammed ID.

If the call alert page is sent successfully, a tone sounds and the display shows the current zone
and channel name.

If the call alert page is not acknowledged, a tone sounds and the display shows the current zone
and channel name.

7.6

Recent Calls

68012007043-EM

Chapter 7 : Advanced Features

Содержание APX 3000


















































































Результаты поиска

Содержание APX 3000

Отзывы:

Бренды по названию

Популярные бренды

Motorola APX 3000, Руководство пользователя

Результаты поиска

Содержание APX 3000

Отзывы:

Бренды по названию

Популярные бренды