manualshive.com logo in svg

Motorola APX 1000 MODEL 3, Руководство пользователя, Страница: 84 / 162

Поделиться
Скачать
Motorola APX 1000 MODEL 3 Скачать руководство пользователя страница 84

Initiating a Quick Call II Transmission

The broadcasting or transmitting radio must be pre-
programmed to see the tone in the Quick Call II tone
list. The receiving radio must also be pre-
programmed to decode the tone to broadcast.

1

 or   to 

QCII

, and press the 

Menu Select

 button

directly below 

QCII

.

2

 or   to select the tone to broadcast.

3

Press the 

PTT

 to broadcast the selected tone, or

press and hold the 

PTT

 to broadcast the selected

tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You
can begin your call after the tone ends.

4

Release 

PTT

 to listen.

Emergency Operation

The Emergency feature is used to indicate a critical
situation.

If the 

Top (Orange)

 button is preprogrammed to send

an emergency signal, this signal overrides any other
communication over the selected channel.

Your radio supports the following Emergency modes:

• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm

Check with your dealer or system administrator for
more information on the programming of this feature.

Only 

one

 of the Emergency modes above can be

assigned to the preprogrammed 

Emergency

 button.

Note:

To exit emergency at any time, press and hold
the preprogrammed Emergency button for
about a second. This timer is programmable
from 0 – 6250 milliseconds by a qualified
technician.

The radio operates in the normal dispatch
manner while in Emergency Call, except if
enabled, it returns to one of the following:

Advanced Features

80

English

Содержание APX 1000 MODEL 3



































































































































































Отзывы:

Нет отзывов