Motorola APX 1000 MODEL 3 Скачать руководство пользователя страница 73

Страница: 73 / 162

The entries are alphabetically sorted.

or to the required subscriber alias.

Perform one of the following actions:

• Press the

Menu Select

button directly below

Optn

and proceed to the next step.

•

or to scroll through the available IDs for the

selected subscriber alias and proceed to step

or to

Call

and press the

Menu Select

button directly below

Sel

or to select the call type.

Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.

Press the

PTT

button to initiate the call.

During the call, the display shows the subscriber
alias.

Press and hold the

PTT

button to talk. Release the

PTT

button to listen.

The LED lights up solid red when the

PTT

button

is pressed.

If there is no voice activity for a preprogrammed
period of time, the call ends.

If the call reaches the maximum ring time, the call
ends.

Adding a New Contact Entry

or to

Cnts

and press the

Menu Select

button

directly below

Cnts

The entries are alphabetically sorted.

or to

[New Contact]

and press the

Menu

Select

button directly below

Sel

or to

Name

and press the

Menu Select

button directly below

Edit

The display shows

Edit name

and a blinking

cursor appears.

Use the

keypad

to enter the name and press the

Menu Select

button directly below

once you

have entered the name.

Advanced Features

English

Содержание APX 1000 MODEL 3



































































































































































Результаты поиска

Содержание APX 1000 MODEL 3

Отзывы:

Motorola APX 1000 MODEL 3, Руководство пользователя, Страница: 73 / 162

Результаты поиска

Содержание APX 1000 MODEL 3

Отзывы: