manualshive.com logo in svg

Motorola APX 1000 MODEL 3, Руководство пользователя, Страница: 153 / 162

Поделиться
Скачать
Motorola APX 1000 MODEL 3 Скачать руководство пользователя страница 153

Standby

An operating condition whereby
the radio’s speaker is muted
but still continues to receive
data.

Status Calls

Pre-defined text messages that
allow the user to send a
conditional message without
talking.

Tactical/ Non-
Revert

The user talks on the channel
that was selected before the
radio entered the emergency
state.

Talkaround

Bypass a repeater and talk
directly to another unit for easy
local unit-to-unit
communications.

Talkgroup

An organization or group of
radio users who communicate
with each other using the same
communication path.

TMS

Text Messaging Service

Trunking

The automatic sharing of
communications paths between

a large number of users (see
Conventional).

Trunking Priority
Monitor Scan List

A scan list that includes
talkgroups that are all from the
same trunking system.

UTC

Coordinated Universal Time.
The international time standard
(formerly Greenwich Mean
Time, or GMT). Zero hours
UTC is midnight in Greenwich,
England, which is located at 0
degrees longitude. Everything
east of Greenwich (up to 180
degrees) is later in time;
everything west is earlier.
There are 42 time authorities
around the world that are
constantly synchronizing with
each other. Abbreviated as
UTC (English backronym =
Universal Time, Coordinated), it
is also known as Zulu (Z) Time.

Zone

A grouping of channels.

Glossary

149

English

Содержание APX 1000 MODEL 3



































































































































































Отзывы:

Нет отзывов