manualshive.com logo in svg

Motorola AP-7131N-FGR, Руководство по продукции

Поделиться
Скачать
Motorola AP-7131N-FGR Скачать руководство пользователя страница 286

AP-7131N-FGR Access Point Product Reference Guide

6-58

4.

Use the 

Radius Client Authentication 

table to configure multiple shared secrets based 

on the subnet or host attempting to authenticate with the Radius server. Use the 

Add 

button 

to add entries to the list. Modify the following information as needed within the table.

5.

Click 

Apply 

to save any changes to the Radius Server screen. Navigating away from the 

screen without clicking Apply results in all changes to the screen being lost.

6.

Click 

Undo Changes

 (if necessary) to undo any changes made. Undo Changes reverts the 

settings displayed on the Radius Server screen to the last saved configuration.

7.

Click 

Logout 

to securely exit the Access Point applet. A prompt displays confirming the 

logout before the applet is closed.

6.10.2 Configuring LDAP Authentication

When the Radius Data Source is set to use an external LDAP server (see 

Configuring the Radius 

Server on page 6-54

), the 

LDAP

 screen is used to configure the properties of the external LDAP server.

To configure the LDAP server:

1.

Select 

System Configuration

 -> 

User Authentication 

-> 

RADIUS Server

 ->

 LDAP

 from 

the menu tree. 

WARNING!

If you have imported a Server or CA certificate, the certificate will not 
be saved when updating the access point’s firmware. Export your 
certificates before upgrading the access point’s firmware. From the 
access point CLI, use the 

admin(system.cmgr)> expcert

 command to 

export the certificate to a secure location.

Subnet/Host

Defines the IP address of the subnet or host that will be 
authenticating with the Radius server. If a WLAN has been created 
to support mesh networking, then enter the IP address of mesh 
client bridge in order for the MU to authenticate with a base bridge.

Netmask

Defines the netmask (subnet mask) of the subnet or host 
authenticating with the Radius server.

Shared Secret

Click the Passwords button and set a shared secret used for each 
host or subnet authenticating against the RADIUS server. The 
shared secret can be up to 7 characters in length.

Содержание AP-7131N-FGR





































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды