manualshive.com logo in svg

Motorola AP-6511, Справочное руководство

Поделиться
Скачать
Motorola AP-6511 Скачать руководство пользователя страница 229

Profile Configuration

 

7-31

Figure 7-17

Forwarding Database screen

4. Define a 

Bridge Aging Time

 between 0, 10-1,000,000 seconds.

The aging time defines the length of time an entry will remain in the bridge’s forwarding table before 
being deleted due to lack of activity. If an entry replenishments a destination generating continuous 
traffic, this timeout value will never be invoked. However, if the destination becomes idle, the timeout 
value represents the length of time that must be exceeded before an entry is deleted from the forwarding 
table. The default setting is 300 seconds.

5. Use the 

+

 

Add Row 

button to create a new row within the MAC address table.

6. Set a destination 

MAC Address 

address. The bridge reads the packet’s destination MAC address and 

decides to forward the packet or drop (filter) it. If it’s determined the destination MAC is on a different 
network, it forwards the packet to the segment. If the destination MAC is on the same network segment, 
the packet is dropped (filtered).

7. Define the target 

VLAN ID 

if the destination MAC is on a different network segment.

8. Provide an 

Interface Name 

used as the target destination interface for the target MAC address.

9. Select 

OK

 to save the changes. Select 

Reset

 to revert to the last saved configuration.

7.3.6 Bridge VLAN

Profile Network Configuration

A 

Virtual LAN 

(VLAN) is separately administrated virtual network within the same physical managed 

network. VLANs are broadcast domains to allow control of broadcast, multicast, unicast and unknown 
unicast within a Layer 2 device. 

Содержание AP-6511



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды