manualshive.com logo in svg

Motorola AP-6511, Справочное руководство

Поделиться
Скачать
Motorola AP-6511 Скачать руководство пользователя страница 220

Motorola Solutions AP-6511 Access Point System Reference Guide

 

7-22

Figure 7-12

Access Point Radio - Advanced Settings screen 

13.Refer to the 

Aggregate MAC Protocol Data Unit (A-MPDU) 

field to define how MAC service frames 

are aggregated by the Access Point radio.

14.Use the 

Aggregate MAC Service Data Unit (A-MSDU)

 drop-down menu to set the supported

 A-MSDU mode.

Available modes include 

Receive Only

 and 

Transmit and Receive

. Transmit and Receive is the default 

value. Using Transmit and Receive, frames up to 4 KB can be sent and received. The buffer limit is not 
configurable.

A-MPDU Modes

Use the drop-down menu to define the A-MPDU mode supported. Options 
include Transmit Only, Receive Only, Transmit and Receive and None. The 
default value is Transmit and Receive. Using the default value, long frames can 
be both sent and received (up to 64 KB). When enabled, define either a 
transmit or receive limit (or both).

Minimum Gap 
Between Frames

Use the drop-down menu to define the minimum gap between A-MPDU frames 
(in microseconds). The default value is 4 microseconds.

Received Frame Size 
Limit

If a support mode is enable allowing A-MPDU frames to be received, define an 
advertised maximum limit for received A-MPDU aggregated frames. Options 
include 8191, 16383, 32767 or 65535 bytes. The default value is 65535 bytes.

Transmit Frame Size 
Limit

Use the spinner control to set limit on transmitted A-MPDU aggregated 
frames. The available range is between 0 - 65,535 bytes). The default value is 
65535 bytes.

Содержание AP-6511



















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды