S P E C T R U M E n t e r p r i s e M a n a g e r
M o t o r o l a V a n g u a r d D e v i c e s
42 of 95
network must be configured with the same
subnetwork address mask.
OverrideDefRte
When set to “enabled” this parameter allows the
router to override the configured Default Gateway
when it receives a RIP update from another router
advertising the default route of 0.0.0.0 with a
cheaper metric.
OverrideStaticRte
When set to “enabled” this parameter allows the
router to override statically configured routing
information with less costly RIP information
received on this interface.
LearnNetworkRte
This setting enables/disables the learning of new
network-level routes received from neighboring
routers on this interface’s network.
LearnSubnetRte
This setting enables/disables the learning of new
subnet-level routes received from neighboring
routers on this interface’s network.
AcceptRIP.
This setting enables/disables the processing of
RIP updates received on this interface.
ASNo.
The Autonomous System (AS) to be used as a tag
for RIP information received on this interface.
Tags are used to group routes together for later
readvertisement via EGP, where the tag is treated
as if it were a route’s source Autonomous System.
Tags are also propagated by the OSPF routing
protocol.
BcastStyle
Specifies the convention for addressing IP
broadcasts to all other hosts on the attached
network. If style value is “local,” the Broadcast Fill
Pattern (BcastFillPattern, described below) fills all
32 bits of the IP broadcast address. If value is
“network,” the network and subnetwork portions
of the IP broadcast address is set to the
interface’s network number, and the Broadcast
Fill pattern fills only the host portion. Examples:
“local” 1-fill = 255.255.255.255; “local” 0-fill =
0.0.0.0; “network”1-fill = 128.185.255.255;
“network” 0-fill =128.185.0.0. All IP devices on a
network must be configured with the same IP
broadcast address convention.
BcastFillPattern
Specifies the IP broadcast fill pattern (either ones
or zeroes) that the router will use when
broadcasting on this interface.
