Motorola solutions MIC-WRL-CHG-500, Руководство пользователя

Страница: 24 / 39

HiFi Microphone
Activating Covert mode
Covert mode disables the status LEDs and audio notifications on the transmitter so no light or
sound comes from it without your action.
To activate (or deactivate) Covert mode, press and hold the Mode button for two seconds.
The transmitter indicates when it is in Covert mode by displaying the Covert Mode icon ( see page
27 ).
Note: In Covert mode, the display backlight only lights when you press the
Display Backlight button.
Status LEDs
The HiFi Mic has status LEDs on both the base and the transmitter. You can use these LEDs in
conjunction with the icons on the display to determine the status of the HiFi Mic.
On the transmitter, the status LEDs are on the front top-right corner of the display. The LEDs on
the transmitter indicate the status of the following HiFi Mic functions:
l
Synchronizing : As the transmitter syncs with the base, both the red and green LEDs flash. After
the transmitter and base are synced, either the green LED turns on or the red LED flashes,
depending on whether the transmitter is fully charged or begins to charge (
see page 30 ).
l
Charging : The red LED flashes while the transmitter is charging. When the transmitter's battery is
fully charged, the red LED turns off and the green LED turns on ( see page 31 ).
l
Normal operation : When the transmitter and base are on, functioning normally, and not
transmitting audio to be recorded, both of the LEDs are off.
l
Recording : When the audio transmitted from the transmitter's microphone is being recorded, the
green LED is on ( see page 21 ).
l
Muted : When the transmitter's microphone is muted, the green LED flashes ( see page 21 ).
l
Turned off : When the transmitter is turned off and is not stored in the base, both of the LEDs are
off.
l
Covert mode : When the transmitter is in Covert mode, both of the LEDs are off ( see page 23 ).
l
Lost connection/out of range : If the transmitter loses connection to or is out of range of the
base, the red LED flashes until the connection is reestablished.
For information on base status LEDs, see page 16 . For information on display icons, see page 27 .
24
HiFi Microphone
HiFi Microphone User Guide
WGD00181, Revision A