Connections and contacts
On the base, the status LEDs are on the front of the unit under the Motorola Solutions logo:
The LEDs on the base can help to indicate the status of certain HiFi Mic functions:
l
Synchronizing
: As the base syncs with the transmitter, both the red and green LEDs flash. After
the base and transmitter are synced, either the green LED turns on or the red LED starts flashing,
depending on whether the transmitter is fully charged or begins to charge (
).
l
Charging
: The red LED flashes while the transmitter is charging. When the transmitter's battery is
fully charged, the red LED turns off and the green LED turns on (
).
l
Normal operation
: When the base and transmitter are on and functioning normally but not
transmitting audio to be recorded, the green LED is on.
l
Recording
: When audio is being recorded from the transmitter's microphone, the base's green
LED is on (
).
l
Muted
: When the transmitter's microphone is muted, the green LED flashes (
).
l
Turned off
: When the transmitter is turned off and not in the base, the red LED flashes.
l
Covert mode
: When the transmitter is in Covert mode, the LEDs on the base behave normally.
Covert mode does not change the LED behavior on the base (
).
l
Lost connection/out of range
: If the base loses connection to or is out of range of the
transmitter, the red LED flashes until the connection is reestablished.
For information on the status LEDs,
. For information on the display icons,
.
Connections and contacts
The base includes a DVR cable connection, antenna connection, and contacts for charging the
transmitter and synchronizing it with the base.
HiFi Microphone
HiFi Microphone User Guide
WGD00181, Revision A
17
