Motorola solutions AAK44X501, Руководство пользователя

Страница: 6 / 60

4
English
1. Fasten the supplied Knob Screws to the back of the Multi-Unit Charger.
2. Position the wall mount bracket in the desired position, and mark the location of
the mounting holes on the wall surface.
3. Mount bracket to wall using the appropriate mounting hardware required for the
type of wall material fixture it is being mounted to. Drill based on the marked
mounting holes on the wall surfaces.
4. Secure the wall bracket in position by installing mounting hardware over the
mounting holes on the wall bracket tightly.
Note: It is recommended to use the supplied Tapping Screws, Washers, and
Toothed Lock Washers on wood stud and solid-flat concrete or brick wall.
5. Align the Knob Screws with the large mounting holes of the wall mount bracket,
and hang the Multi-Unit Charger securely.
Ensure the area behind the mounting surface is always free of electrical
wires, cables, and pipes before cutting, drilling, or installing the
mounting screws.
C a u t i o n
Ensure the installation direction
of the mounting bracket is in
the correct position.
MN004237A01.book Page 4 Friday, August 14, 2020 10:35 PM