Fig. 10
Fig. 11
Fig. 12
b) Put the foundation plate to the floor, using adequate expansion plugs and provide one or more
tubes for routing the electric cables through the plate (Fig10 and 11).
Using a level, check if the plate is perfectly horizontal.
7.4. Positioning the operator
Lay the electric cables to connect motor to accessories and power supply as shown in Fig. 4.
To facilitate making the connections, allow the cables to project by the required length for
connection to the control board, transformer and etc (if provided).
Position the operator on the plate, using the supplied screws as shown in Fig. 12.
Pág. 06
