Fig. 25
Fig. 26
When installing nylon rack, make the application following the same steps described in the
previous paragraphs.
Start by placing the gate in the closed position, support the first meter of rack pinion on the
engine and keeping it level horizontally, screw the first screw.
Go opening the gate and tightening the remaining bolts.
Continue adding more rack parts and repeating the same steps to complete the installation.
Pág. 09
Fig. 24
- Prepare the rack to be applied.
Putting these spacers in all holes of the
rack in order to be completely secure.
7.8. Installing the rack
a) Manually put the gate leaf in the closed position.
b) Positioning the first rack part to be bolted, supported on the pinion and with help of the level
and clamping tool, keep it horizontally leveled.
c) Move the gate to manually back and forth, to ensure that the gear rack is properly seated on
the pinion and movement occurs smoothly.
d) Set the rack in the gate. (Fig. 21) .To ensure a correct fixation, can go slowly moving the gate
and setting the gate spacers always near the pinion.
e) Pull another element of the rack above, using a piece of additional rack teeth to synchronize
the two elements (Fig. 22).
f) Use a level again to make sure that rack is perfectly level.
g) Manually move the gate and carry out the operations of attachment such as with the first
element, proceeding up to the end of the gate.
NOTE: This motor can work with all types of racks.
