Motorline professional ROSSO EVO, Руководство пользователя и инсталлятора

Страница: 10 / 18

10A 10B
1
2
3
4
5
6
30
EN EN
05. PROGRAMMING 05. PROGRAMMING
MENU FUNCTIONS LEGEND
Legend
:
• Display
• Main Menu
• Programming transmmiters
• Up
• Down
When you turn the power on, the LCD displays a countdown from 99 to 11 , and the
courtesy lamp stays on for 2 seconds. When the motor is in standby, the display shows
the message .
When the motor is opening, the display always shows the message .
When the motor is closing, the display always shows the message .
Note:
If you connect a signaling lamp, this will blink during any gate’s movement cycle.
Conector Links:
1
• Pedestrian Gate (NC contact)
2 • PB (contact NO)
3 • PE (contact NC)
4
• GND (common)
5
• +24V
6 • Extern Lamp (max. 24V 5W)
The control board has a main menu which allows access to all the different settings of
the automatism.
Start all the programs from the stand-by mode (--)!
All the menu configuration instrution in this manual have been performed using as
starting point the stand-by mode (--).
Begin programming the P1 menu with the gate closed, since the first maneuver configuration
will be the opening.
Programming the "Follow Me" function Enable/disable condominium function
Programming opening and closing
courses
Programming maintenance warnings
Programming the automatism force
level
Programming transmitters using
already configured transmitters
Enable/disable safety photocells Counting of maneuvers
Programming the self-closing feature Enable/disable the service door
01
• Press the
M
button for 4 seconds to enter the programming menu.
02 • The display will show P1. Press
▼
key to access P0 .
03 • Press M key once to acces the submenu.
04
• The display will show the currently set value. You can now select another option
using the
▲
or
▼
keys to select the desired value for the "Follow Me".
Note: Each value corresponds to the seconds that the automation waits to close.
• Example: 02 corresponds to 2 seconds .
05 • Prima a tecla M durante 2seg para confirmar a opção desejada.
Functionality
• The "Follow Me" function automatically closes the gate, after the
photocells detect the passage of people or vehicles.
The time space between the passage of cars/persons through the photocells and the
start of the gate closing maneuver can be set from 0 to 10 seconds.
• Programming the "Follow Me" function
This function works only if the P3 and P4 functions are enabled .