6A
6B
EN
EN
03. INSTALLATION
POSITIONING THE OPERATOR
RELEASING THE OPERATOR
03. INSTALLATION
Adjust the distance of the operator from the gate by
referring to Fig.13.
Insert supplied key on the lock, turn
it clockwise 90° (Fig.18), pull and
open the manual release (Fig.19).
After opened the manual release,
you can operate the door manually.
1 •
Prepare the rack to be applied. Putting these spacers in all
holes of the rack in order to be completely secure.
2 •
Manually put the gate leaf in the closed position.
3 •
Positioning the first rack part to be bolted, supported on the pinion and with help of the level and
clamping tool, keep it horizontally leveled.
4 •
Move the gate to manually back and forth, to ensure that the gear rack is properly seated on the
pinion and movement occurs smoothly.
5 •
Set the rack in the gate. (Fig. 21) .To ensure a correct fixation, can go slowly moving the gate and setting
the gate spacers always near the pinion.
1 •
Fix the operator slightly tightening the
screws as shown in Fig. 14.
3 •
After the upper-cover fixed, please install
the side-cover (Fig. 17).
57mm
FIXING OPERATOR
INSTALLING THE RACK
2 •
After fixing the motor, screw cover (Fig. 15 and 16).
After the installation, you must remove the
exhaust screw.
Fig. 13
Fig. 14
Fig. 16
Fig. 17
Fig. 18
Fig. 15
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
