4A
4B
24AC
+ BAT -
MOT
+ LED -
V+
SEN PUL BL
DS
ANT
GND
GND
GND
LIGHT
VR1
+
-
SEL
SET
MONO TEMP. I.CMD
12V
24V
0V
EN
EN
06
02
01
04
03
05
MPIE10 pillars were developed for traffic control, limiting the passage of vehicles.
Built entirely in 304 stainless steel and PVC, they are anti-vandalism pillars, suitable for underground
installation.
The kit is composed by the following components:
02. AUTOMATISM
02. AUTOMATISM
TECHNICAL CHARACTERISTICS
KIT COMPONENTS
01
• 01 MSC50 twilight sensor
02
• 01 MC61PL Control board
03
• 01 Integrated RGB LED module
04
• 01 MPIE10
05
• 02 FALK remote controllers
06
• 01 12 Vdc Battery
400
600
800
• Course
370mm
570mm
785mm
• Weight
35Kg
40Kg
45Kg
• Power Supply
24 Vdc
• Power
150W
• Nominal power consumption
3A
• Operating Temperature
-20˚C ~ 50˚C
• Material of the moving piece
2.5mm Stainless steel
• Cover
Non-slip 4mm Stainless steel
• Material of the embedded piece
10mm PVC
• Diameter
Ø204mm
• Top flange
400mm
• Maximum weight supported
20.000Kg
To unlock the electromechanical pillar, insert the key into
the slot and turn in a clockwise direction.
MANUAL UNLOCKING
•
Please hold the key to descend the pillar slowly,
because once unlocked, the pillar is free and will
go down if you don’t hold it.
•
The pillar is equipped with a battery that, in case
of power failure, allows the pillar to be opened (go
down) once. Do not use the pillar again until power
is restored, because the battery was placed only
for emergency situations and may not have enough
energy to complete the closure.
