background image

1A

1B

1A

1B

1B

4A

5A

5A

7A

5B

7B

6A

8A

6B

8B
9A

9B

10A

EN

EN

00. CONTENT

INDEX

COMPONENTS CONNECTION TO THE CONTROL BOARD 

01. SAFETY INSTRUCTIONS

TECHNICAL SPECIFICATIONS  

03. CONTROL BOARD

02. CONNECTIONS SCHEME

FUNCTION’S BOARD 

PROGRAMMING AUTOMATIC CLOSING  

OPENING AND CLOSING COURSE PROGRAMMING 

ENABLE/DISABLE STOP

AUTOMATION SENSIBILITY PROGRAMMING 

ENABLE/DISABLE CONDOMINIUM FUNCTION

ENABLE/DISABLE SAFETY PHOTOCELLS

INCREASE OR DECREASE DECELERATION

ENABLE/DISABLE FOLLOW ME

05. FUNCTIONS

INSTRUCTIONS FOR FINAL CONSUMERS/TECHNICIANS

06. TROUBLESHOOTING

PROGRAMMING/ERASE REMOTE CONTROLS  

04. REMOTE CONTROLS 

ATTENTION:

01. SAFETY INSTRUCTIONS

This product is certified in accordance with European 

Community (EC) safety standards.

This product complies with Directive 2011/65/EU of the 

European Parliament and of the Council, of 8 June 2011, on 

the restriction of the use of certain hazardous substances in 

electrical and electronic equipment.

(Applicable in countries with recycling systems).

This marking on the product or literature indicates that the 

product and electronic accessories (eg. Charger, USB cable, 

electronic material, controls, etc.) should not be disposed 

of as other household waste at the end of its useful life. To 

avoid possible harm to the environment or human health 

resulting from the uncontrolled disposal of waste, separate 

these items from other types of waste and recycle them 

responsibly to promote the sustainable reuse of material 

resources. Home users should contact the dealer where they 

purchased this product or the National Environment Agency 

for details on where and how they can take these items 

for environmentally safe recycling. Business users should 

contact their vendor and check the terms and conditions 

of the purchase agreement. This product and its electronic 

accessories should not be mixed with other commercial 

waste.

This marking indicates that the product and electronic 

accessories (eg. charger, USB cable, electronic material, 

controls, etc.) are susceptible to electric shock by direct or 

indirect contact with electricity. Be cautious when handling 

the product and observe all safety procedures in this manual.

Содержание MC61BR












Отзывы: