9A
9B
1 2
1
1
2
1
2
1
2
1
G
F
+
+
-
-
EN
EN
04.REGULATION
ADJUSTING FRONT PROFILE
MANUAL UNLOCKING
Never loosen the screws in their entirety!
Improper front profile adjustment can cause damage when closing the awning! Too low
or too high positioning of the hinge can cause tarpaulin or top deterioration whenever
the awning is closed!
The Awning is already out of the factory tuned. This adjustment is only necessary when
the arm inclination is changed.
04.REGULATION
Tighten or unscrew the screws (F, G) until the desired
setting is found.
Put the crank and turn it to open / close the awning.
REGULATE FRONT PROFILE
In order to optimize the closing of the awning, it
is necessary to adjust the inclination of the front
profile according to the inclination of the arm. Place
the awning open at about 500mm.
UNLOCKING AWNING
The awning is arranged so that, in case of power failure or other situation that prevents the
electrical operation of the equipment, it is possible to open or close the awning manually
by means of the crank.
