8A
8B
1 2
2
1
1
2
1 2
1
2
1
J
I
I
J
I
1
+
-
2
3
4
EN
EN
SETTING THE ARM JOINT
04.REGULATION
04.REGULATION
ADJUSTING THE AWNING TILT
Zone to aid in joint tuning
Zone for aid in the regulation of the inclination of the
arms
REGULAR AWNING
To start adjusting the slope of the Awning, place it
fully open. You should assist the arms with the hand
throughout the process.
Unlock the screw 3 and loosen the screws 4
alternately until you find the desired incline.
Turning to the right the arm goes up, turning to the
left the arm descends. Do this operation in one arm
and then in the other.
Do not unscrew both arms at
the same time.
Retighten screw 3 when you are satisfied with the
slope of the Awning.
While performing the
operations, the joint will
initiate the changes of
ascent or descent.
LOOSEN SCREWS
AFFECT THE
ARTICULATION
With the awning open at
about 500mm, loosen screws
1 and 2 slightly.
To raise or lower the joint,
rotate the wheel in one
direction or the other.
