62
Automatic Chronometer Function (LAP)
This function describes the correct working/visualization of the chrono-
meter related to TD and AVE. This information is visualized by using digit
13-16 and logo LAP. The data represents the effective route time of the
vehicle in the form mm:ss if hours = 0 and in the form hh:mm if hours > 0.
It is automatically activated by the first pulse coming from the speed
sensor and it stops after 3 seconds from receiving of the last pulse which
arrives from the speed sensor. If hours >0, when LAP is operative, the
digit that separates the hours from the minutes is shown blinking, while it
is shown fixed when LAP is not operative.
If hours = 0, when LAP is operative, the digit (‘ and “) that separates the
minutes from the seconds is shown blinking, while it is shown fixed when
LAP is not operative.
It is possible to set to zero the counter of this parameter by pushing the
Set button for about 2 seconds, in correspondence of the function LAP till
when the value 00 ‘00 “appears.
The setting to zero of LAP, which is possible both when the vehicle is sto-
pped or when the vehicle is running, produces the setting to zero ofTD
and AVE too.
If the data gets over the value 23-59 (which means 23h59’59”), the
system provides to set to zero LAP, TD and AVE, then it starts again the
counting.
