60
Time Function (TIME)
This function describes the correct working/visualization of the current
hour. This function is always shown in the format hh:mm, by using di-
git 1-4. Clock is active also when the microcontroller is in sleep mode
phase and regulation of the hour can be done only when the vehicle is
stopped.
Visualized Series:
from 0:00 to 23:59 for method 0-24
from 0:00 to 12:59 for method 0-12 am
from 1:00 to 11:59 for method 0-12 pm
Clock regulation can be done by pushing Mode button until when only
segments related to TIME function are active (about 5sec.), while all the
others are off.
It’s possible to modify in series: first the hours then the minutes, this
depends by the selected data (that will be shown blinking with f=lHz,
Duty=50%).
By pushing the Set button the selected parameter will add one unit, while
by pushing the Mode button it will be possible to select the chosen para-
meter (minutes or hours) and to exit from regulation phase.
