MotorGuide Digital Steering Скачать руководство пользователя страница 19

90-MM6900  

17

 

 

 

MOTORGUIDE LIMITED TWO-YEAR WARRANTY 

 

(KEEP YOUR ORIGINAL PURCHASE RECEIPT)  

 

For recreational use customers, MotorGuide Freshwater Series 
electric trolling motors are warranted to the original retail 
purchaser

1

 to be free from defects in material and/or workmanship 

for a period of two (2) years from the date of purchase.  This 
Limited Warranty begins on the date the product is first sold to a 
retail purchaser or the date on which the product is first put into 
service, whichever occurs first.  Commercial

2

 users of these 

products receive coverage for one (1) year from the date of first 
retail sale.  MotorGuide Accessories are covered by this Limited 
Warranty for a coverage period of one (1) year from the date of 
retail sale. 
 
This warranty does not cover product damage due to abuse, i.e., 
bent columns, bent armature shafts, broken control cables, etc., 
accidents, modifications, misuse, excessive wear or damage 
caused by an owner’s failure to provide reasonable and 
necessary installation or care.  Opening the lower unit (motor) by 
anyone other than an authorized Service Dealer will void this 
warranty.  To obtain warranty service, the purchaser should 
deliver or return the unit (postage prepaid and insured) to any 
MotorGuide Authorized Service Dealer.  Products returned by 
mail should also be carefully packaged and include a note 
describing the nature of the problem and/or service requested.  A 
copy of the proof of purchase or registration verification is 
required with the return of the product for warranty consideration.  
MotorGuide, at its discretion, will repair or replace items covered 
under the terms of this warranty.  Neither MotorGuide nor 
MotorGuide Service Dealers are responsible for damages to 
MotorGuide products due to repairs performed by anyone other 
than an authorized MotorGuide Service Dealer.  Neither 
MotorGuide nor Mercury Marine is responsible for failure or 
damage caused by improper installation, set-up, preparation, or 
previous service or repair errors. 
 
The product registration must be processed by MotorGuide within 
ten (10) days from the date of purchase to validate your warranty.  
MotorGuide products requiring service not covered under the 
terms of this warranty may be repaired or replaced for a 
reasonable fee.  ALL INCIDENTAL AND\OR CONSEQUENTIAL 
DAMAGES ARE EXCLUDED FROM THIS WARRANTY.  
IMPLIED WARRANTIES ARE LIMITED TO THE LIFE OF THIS 
WARRANTY.  SOME STATES DO NOT ALLOW LIMITATIONS 
ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS 
OR EXCLUSIONS MAY NOT APPLY TO YOU.  THIS 
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU 
MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH MAY VARY 
FROM STATE TO STATE. 
 
For Your Records: 
Model 
Number__________________________________________        
 
Serial Number___________________________________ 

                                                 

1

 

Warranty is transferable to any subsequent purchaser for the 

duration of the unused warranty period.

 

2

 

Commercial use is defined as any work or employment-related 

use of the product, or any use of the product which generates 
income, for any part of the warranty period, even if the product is 
only occasionally used for such purposes.  

 

MOTORGUIDE LIMITED THREE-YEAR 

WARRANTY 

 

 (KEEP YOUR ORIGINAL PURCHASE RECEIPT) 

 

For recreational use customers, MotorGuide Tour, Digital 
Freshwater, Digital Steering, and Saltwater Series electric trolling 
motors are warranted to the original retail purchaser

1

 to be free 

from defects in material and/or workmanship for a period of three 
(3) years from the date of purchase.  This Limited Warranty 
begins on the date the product is first sold to a retail purchaser or 
the date on which the product is first put into service, whichever 
occurs first.  Commercial

2

 users of these products receive 

coverage for one (1) year from the date of first retail sale.  
MotorGuide Accessories are covered by this Limited Warranty for 
a coverage period of one (1) year from the date of retail sale. 
 
This warranty does not cover product damage due to abuse, i.e., 
bent columns, bent armature shafts, broken control cables, etc., 
accidents, modifications, misuse, excessive wear or damage 
caused by an owner’s failure to provide reasonable and 
necessary installation or care.  Opening the lower unit (motor) by 
anyone other than an authorized Service Dealer will void this 
warranty.  To obtain warranty service, the purchaser should 
deliver or return the unit (postage prepaid and insured) to any 
MotorGuide Authorized Service Dealer.  Products returned by 
mail should also be carefully packaged and include a note 
describing the nature of the problem and/or service requested.  A 
copy of the proof of purchase or registration verification is 
required with the return of the product for warranty consideration.  
MotorGuide, at its discretion, will repair or replace items covered 
under the terms of this warranty.  Neither MotorGuide nor 
MotorGuide Service Dealers are responsible for damages to 
MotorGuide products due to repairs performed by anyone other 
than an authorized MotorGuide Service Dealer.  Neither 
MotorGuide nor Mercury Marine is responsible for failure or 
damage caused by improper installation, set-up, preparation, or 
previous service or repair errors. 
 
 
The product registration must be processed by MotorGuide within 
ten (10) days from the date of purchase to validate your warranty.  
MotorGuide products requiring service not covered under the 
terms of this warranty may be repaired or replaced for a 
reasonable fee.  ALL INCIDENTAL AND\OR CONSEQUENTIAL 
DAMAGES ARE EXCLUDED FROM THIS WARRANTY.  
IMPLIED WARRANTIES ARE LIMITED TO THE LIFE OF THIS 
WARRANTY.  SOME STATES DO NOT ALLOW LIMITATIONS 
ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE 
EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS 
OR EXCLUSIONS MAY NOT APPLY TO YOU.  THIS 
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU 
MAY ALSO HAVE OTHER LEGAL RIGHTS WHICH MAY VARY 
FROM STATE TO STATE. 
 
For Your Records: 
Model 
Number__________________________________________        
 
Serial Number_____________________________________ 
 
 
 

1

 Warranty is transferable to any subsequent purchaser for the 

duration of the unused warranty period. 

2

 Commercial use is defined as any work or employment-related 

use of the product, or any use of the product which generates 
income, for any part of the warranty period, even if the product is 
only occasionally used for such purpose.

Содержание Digital Steering























Отзывы: