© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULWRPINS002 12-11-2020
www.motorcitywashworks.com
20
Optional License Bump Retract:
Your
MCWW License Plate Bump Retract system is designed to “move the brush away” from the center
front of the vehicle by about 16 to18” by pushing the
ARM POSITIVE STOP MOUNT
(see Picture #32).
Install
the
PASSENGER’S SIDE
cylinder assembly on the upper head frame, and position in behind the
positive stop mount like shown on Picture #33 below.
Pic #32 Bump Out
Pic #33 Mount on Upper Frame
MAIN AIR
3/8" BLACK AIR LINE
SUPPLY
1 20 VAC
MINI WRAP
LICENSE PLATE
B UMP AIR PANEL
O PERA TING
P RESSURE
9 0-10 0 PSI
8 DCA LWR PPN L0007
Pic #34 Air Lines
Install
the air panel in the mechanical room and pull a
3/8” OD BLACK AIR LINE
from the air panel to the
MINIWRAP
and then
TEE
to each cylinder.
AIR CYLINDER
ARM POSITIVE
STOP MOUNT
ARM POSITIVE
STOP MOUNT
