© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULWRPINS002 12-11-2020
www.motorcitywashworks.com
11
Star Foam Loading Instructions:
Bring
the two
HUB ASSEMBLIES
to your working area and remove the two compression plates from the
top of the hub (see Picture #19).
Open
the washing material boxes and load in
ONE 10” X 48”OD-1/4” BUN
followed by
TWO 8” X 48”
OD-1/4” BUNS
and another
10” X 48”OD-1/8” BUN
onto the hub assembly (see Picture below). Next,
load
TWO 10” X 54”OD-1/8” BUNS, ONE 10” X 60”OD-1/4” BUN,
and finally,
ONE 8” X 60”OD-1/4”
BUN.
Reinstall the two compression plates and mount the hub to the main shaft.
Pic #19 Star Foam Hub Pic #20 Star Foam Hub Assembly
Cotton Cloth™ Loading Instructions:
Bring
the two
HUB ASSEMBLIES
to your working area and remove the two compression plates from the
top of the hub. Slide
4
PVC STRIPS
into each channel (see Picture #21) and temporarily hold them in
place with a small piece of masking tape.
Open
the washing material boxes and start loading the hub with
THREE FOAM SPACERS,
followed by
ONE COTTON CLOTH™ RING,
and then
TWO FOAM SPACERS.
Continue until you’ve installed a total
of
12 CLOTH RINGS
(See Picture #22 below)
.
Finish with
THREE FOAM SPACERS.
10” X 48”OD-1/4”
10” X 48”OD-1/8”
10” X 54”OD-1/8”
10” X 54”OD-1/8”
10” X 60”OD-1/4”
8” X 60”OD-1/4”
8” X 48”OD-1/4”
8” X 48”OD-1/4”
COMPRESSION
PLATES
STOP!
VERIFY THAT YOU HAVE THE CORRECT FOAM AND
CLOTH MATERIAL BEFORE STARTING TO LOAD THE HUBS. WASH
MATERIAL COMES IN MANY DIFFERENT LENGTHS, THICKNESSES AND
CONFIGURATIONS. NOT FOLLOWING PROPER LOADING INSTRUCTIONS
MAY LEAD TO EQUIPMENT MALFUNCTION!
