background image

model no. 011-1985-4  |  contact us 1-888-942-6686

4

SAFETY INF

ORMA

TION

INTRODUCTION

This MotoMaster

®

 Nautilus

TM

 Battery Charger 

features advanced microprocessor technology 
making battery charging faster, easier, and safer 
than ever before. This manual will explain how to 
use the charger safely and effectively. 
Please read and follow these instructions and 
precautions carefully. 

SAFETY INFORMATION

SAVE THESE INSTRUCTIONS.

 

This manual contains important safety and 
operating instructions.
• 

This charger is not intended for use by children.

• 

Use of an attachment not recommended or 
sold by the battery charger manufacturer 
may result in a risk of fire, electric shock or 
injury to persons.

• 

To reduce the risk of damage to electric plug 
and cord, pull by the plug rather than the 
cord when disconnecting charger.

• 

Use of an improper extension cord could 
result in a risk of fire and electric shock. If an 
extension cord must be used, make sure:
• 

The pins on plug of extension cord are 
the same number, size and shape as 
those of plug on charger.

• 

The extension cord is properly wired and 
in good electrical condition.

• 

The wire size is large enough for AC 
ampere rating of charger as specified in 
Using An Extension Cord.

• 

When using an extension cord, make the 
AC connection to the charger outside of 
the battery compartment as far away as 
practical, to reduce the risk of a spark 
igniting gases in the compartment.

• 

DO NOT 

operate charger with damaged 

cord or plug – replace the cord or plug 
immediately.

• 

DO NOT

 operate charger if it has received 

a sharp blow, been dropped, or otherwise 
damaged in any way; take it to a qualified 
serviceman.

• 

DO NOT

 disassemble charger; take it to a 

qualified service facility when service or 
repair is required. Incorrect reassembly may 
result in a risk of electric shock or fire.

• 

To reduce risk of electric shock, unplug 
charger from outlet before attempting any 
maintenance or cleaning. Turning off controls 
will not reduce this risk.

PERSONAL SAFETY INSTRUCTIONS

• 

Consider having someone close enough by to 
come to your aid when you work near a lead-
acid battery.

• 

Have plenty of fresh water and soap nearby  
in case battery acid contacts skin, clothing, 
or eyes.

WARNING!

Handling the cord on this product or objects associated with the use of this product may expose you to lead. 
Wash hands after handling. 

WARNING! RISK OF EXPLOSIVE GASES

Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal battery 
operation. For this reason it is of the utmost importance that each time before using your charger, you read and follow the 
instructions provided exactly. To reduce risk of battery explosion, follow these instructions and those published by the 
battery manufacturer. 

FPO

Содержание NAUTILUS 011-1985-4













Отзывы: