model no. 011-1985-4 | contact us 1-888-942-6686
10
12V
BATTERY TYPE BUTTON
Press to select battery type or check battery type during charging.
LED INDICATORS
POWER ON (GREEN)
The charger is connected to AC power.
CHARGING STATUS/BATTERY TYPE (GREEN)
Charging status: After battery type has been selected and charging has begun, charging status is indicated
from right to left, in 25% increments. The LEDs will blink and then turn solid, as charging progresses.
The
LEDs of other banks which are not charging will be solid on, to show the percentage of those batteries.
Battery type: To change the battery type, press and hold the
12V
button for 3 seconds, and then toggle
the button to select the desired battery type. For a deep-cycle battery, refer to the battery manufacturer’s
specifications to determine the battery type. The LED will flash for 3 seconds, and then turn solid. If no
battery type is selected, the
LED will light and the bank will turn off. To check the battery type setting
during charging, press the
12V
button.
(FLASHING RED)
The connections are reversed.
(SOLID RED)
The charger has detected one of the following problems:
•
Aborted charge
•
is selected, the bank is OFF.
•
Battery not connected or the battery voltage is too low.
See Troubleshooting for more information.
NOTE:
A charging bank will NOT begin charging if that bank’s Red LED is flashing.
UNDERS
TANDING C
ONTR
OLS & FEA
TURE
S