Motomaster 011-2064-0, Инструкция по эксплуатации

Страница: 6 / 13

8
model no. 011-2064-0 | contact us: 1-888-942-6686
9
OPERATION OPERATION
OPERATION
WARNING! EQUIPMENT DAMAGE
• Do not crank the engine for more than 3 seconds at a time. The jump start
feature is designed for short term operation only. Operating the jump start
feature for more than 3 seconds may cause damage to the unit. Do not
attempt more than 5 consecutive jump starts within a 15 minute period.
Allow the product to rest for 15 minutes before attempting to jump start the
vehicle again.
• Risk of shock, fire, combustion, and burns, do not disassemble, modify,
crush, heat above 60ºC (140ºF) or incinerate.
IMPORTANT!
• Before attempting to boost vehicle.
• Verify that you have a 12 volt lead-acid battery.
• Turn off vehicle ignition and all accessories; ensure vehicle is in ''park''
and emergency brake is engaged.
• Do not attempt to jump start an engine if the battery level is at 50% or less.
• Do not place the unit where it could fall when vehicle starts up.
• Make sure that cables are routed away from motor fan or belts.
GETTING STARTED
This product comes partially charged and needs to be fully charged prior to use.
Carefully read and understand the vehicle owner's manual on specific precau-
tions and recommended methods for jump starting the vehicle. Make sure to
determine the voltage and chemistry of the battery by referring to your battery
owner's manual prior to using this product. This product is for jump starting 12
volt lead acid batteries only.
Warm-up Mode
This product is designed with an innovative self-heating feature which will warm
up the internal lithium-ion battery, improving performance in sub-zero tempera-
tures. When the unit is powered ON, if the internal battery temperature is below
0ºC, the icon will appear on the display indicating that unit is in Warm-up
mode. During warm-up, functions such as jump starting and air compressor are
inoperable – you must wait until warm-up is complete to use these functions.
Once the icon disappears, the unit is ready for use. Depending on tempera-
ture, warm-up can take anywhere from a few seconds up to 10 minutes.