background image

model no. 011-2064-0  |  contact us:  1-888-942-6686

1

SAVE THESE INSTRUCTIONS!

This manual contains important safety and operating instructions. 
Read all instructions and follow them.

 

 

IMPORTANT SAFETY WARNINGS

KEY PARTS DIAGRAM
Screen Display

OPERATION 

Jump Starting
Low Voltage Batteries & Manual Override
Recharging
Operate As 12 V Power Supply
Operate Air Compressor
LED Light
USB Power

TROUBLE SHOOTING

TECHNICAL SPECIFICATIONS
ENVIRONMENTAL PROTECTION

WARRANTY

1
6
7
8
10
12
13
14
15
17
17
18
22
23
23

READ AND UNDERSTAND ALL SAFETY INFORMATION 

BEFORE USING THIS PRODUCT. Failure to follow these 

safety instructions may result in ELECTRICAL SHOCK, 

EXPLOSION OR FIRE, which may result in a SERIOUS 

INJURY, DEATH, or PROPERTY DAMAGE.

Explosive Gases.

 Working in the vicinity of a lead-acid 

battery is dangerous. Batteries generate explosive gases 

during normal battery operation. To reduce risk of battery 

explosion, follow all safety information instructions and 

those published by the battery manufacturer and manu-

facturer of any equipment intended to be used in the 

vicinity of battery. Review cautionary markings on these 

products and on engine.

Electrical Shock.

 Product is an electrical device that can 

shock and cause serious injury. Do not cut power cords. 

Do not submerge in water or get wet.

Explosion. 

Unmonitored, incompatible, or damaged 

batteries can explode if used with product. Do not leave 

product unattended while in use. Do not attempt to jump 

start a damaged or frozen battery. Use product only with 

batteries of recommended voltage. Operate product in 

well ventilated areas.

Fire.

 Product is an electrical device that emits heat and 

is capable of causing burns. Do not cover product. Do not 

smoke or use any source of electrical spark of fire when 

operating product. Keep product away from combustible 

materials.

Eye injury.

 Wear eye protection when operating product. 

Batteries can explode and cause eye and skin irritation. In 

the case of contamination of eyes or skin, flush affected 

area with running clean water and contact poison control 

centre immediately.

WARNING

TABLE OF CONTENTS

IMPORTANT SAFETY WARNINGS

Содержание 011-2064-0














Отзывы: