background image

Automatic safety features

The power inverter includes the following automatic safety 
features to ensure safe and trouble-free operation:
• Vehicle battery low-voltage automatic alarm and shutdown: activated when the battery 

voltage drops to 10–11 V, to protect the battery from being damaged.

• Vehicle battery high-voltage automatic shutdown: activated when the battery voltage rises 

to a dangerously high level due to a defective battery.

• Overload protection with automatic shutdown: activated when a device rated more than 

100 W is plugged into the power inverter.

• Overheat protection with automatic shutdown: activated in case the power inverter 

overheats due to improper ventilation or a high ambient temperature.

• Output short-circuit protection: activated in case of a short-circuit in the connected device.
• Built-in fan: activated when a significant amount of power increases the internal 

temperature and it exceeds its ambient operating temperature.

• Replaceable 8 A fuse: used for continued protection against a risk of fire or electric shock 

and should be replaced manually, if necessary.

The 

RED INDICATOR

 (G) indicates a shutdown of the power inverter due to low-voltage, 

high-voltage, overloading or overheating.
An 

AUDIBLE ALARM

 warns you if a low-voltage or a high-voltage shutdown is about to occur   

(  See troubleshooting).

WARNING!

Before cleaning, make sure the power inverter is switched off and disconnected from 
the power source.
• The exterior of the device should be cleaned periodically with a damp cloth or sponge and 

a mild soap solution.

• Be sure vents and fans are free of dust or debris.
• Never immerse the device in water or any other liquid.
• For cleaning, never use corrosive detergents, wire brushes, abrasive scourers, or metal or 

sharp objects.

• Store the device in a cool, dry, location that is protected from moisture and out of the reach 

of children.

Maintaining battery condition

• Vehicle batteries are designed to provide brief periods of very high current needed for 

engine starting. They are not intended for constant deep discharge.

• Regularly operating the power inverter from a vehicle's battery until the low-voltage 

alarm sounds will shorten the battery's life.

• The battery operating time depends on:

• the charge level of the battery,
• the battery capacity,
• the amount of power drawn by the devices that are connected to the power inverter.

With an average load of about 240 W connected to the power inverter, consider that the 
engine should be started at least once an hour for 10–15 minutes to keep the battery from 
discharging.
• If you need to start the engine to recharge the battery, first disconnect the power inverter

from the battery or the vehicle's 12 V outlet.

24

model no. 011-1870-6  |  contact us:  1-877-466-8191

25

MAINTENANCE

OPERATION

Содержание 011-1870-6

















Отзывы: